Reciprocating Seals for Hydraulic Cylinders
The most common fluids used in hydraulic systems are mineral oil based. In recent years, there has been a lot of attention paid to environmentally acceptable hydraulic fluids, but their use, so far, is limited, mainly because of their relatively high-cost compared with mineral oil. In many cases, standard reciprocating seals can be used in these fluids. Fire resistant fluids, such as high water based fluids, have applications in particular areas such as long-wall mining and have led to the evolution of specialised seals, but the vast majority of applications use hydraulic mineral oil. Two main factors affecting mineral oil based systems are cost and leakage.
This article looks at two key subjects:-
• The effect of tube finish on seal performance – the lowest cost tube may not give the desired performance
• The influence of the wiper on the leakage from the gland
THE EFFECT OF TUBE FINISH ON SEAL PERFORMANCE
A piston seal for a hydraulic cylinder is only part of the sealing system. Its life will depend on a number of factors, a major one being the nature of the surface against which it is running. Steel hydraulic cylinder tubes generally have a surface finish which is produced in one of three ways: -
• honing
• roller-burnishing
• drawing over a mandrel (DOM)
Hallite Seals have carried out major studies on the performance of double acting seals, used in both a double acting and single acting manner examining the affect of the method of tube manufacture and, hence, tube surface texture, on the performance of a typical double acting piston seal.
Cylinder Tube Manufacture
Hydraulic cylinder tubes are generally made from steel which is drawn over a mandrel (DOM). This process work hardens the material and gives it desirable mechanical properties. The final tube surface is obtained in one of three ways. In the honing process the tube is machined to gain the required roundness and bore tolerance and to remove surface imperfections, then finished by internally grinding or honing. In skived and roller-burnished tube the tube is again internally machined (skived) and flattened by rollers on the machining head. More recently drawing techniques have been developed such that the tube is considered ready to use in the as drawn state. This is known as special smooth inside diameter (SSID) or ‘smooth bore’ tube.
In terms of finished tube cost the ranking starting with the cheapest is SSID DOM, roller burnished and honed. SSID DOM tube can be 30% cheaper than roller-burnished, so its attractions to the cylinder builder are obvious. However, the quality of such tubes can be an issue which could lead to premature seal failure.
The Limitations of As-Drawn (SSID) Tube
SSID tube has been found to have limitations in application, particularly where the double acting piston seal is being driven into pressure. This can happen, for instance, when the lowering of a load is being controlled by the release of fluid from the full bore. The process of manufacture of as-drawn tube results in axial scoring of the tube; in roller-burnished and honed tube, such defects are eliminated by the finishing of the tube in a circumferential direction. These axial scores can provide sites for the fluid to jet over the seal eroding the contact face, particularly when the seal is being driven into pressure. A further difficulty is that such defects are not detected by the usual methods of surface finish measurement.
THE INFLUENCE OF THE WIPER ON GLAND LEAKAGE
The gland sealing system of a hydraulic cylinder consists of a number of elements, including the seal housings, the rod seal, the rod wiper, the rod bearing, the hydraulic fluid and the rod itself. Rods are generally hard chrome plated and relatively consistent in finish. The rod wiper has the primary function of preventing external contamination reaching the rod seal and gland bearings, and for this reason is fitted to the vast majority of hydraulic cylinders. However, this component has often been omitted in the laboratory testing of reciprocating seals.
Extensive studies have been carried out on the factors affecting reciprocating seal performance including the counter-face surface finish and the effects of contamination.
Hallite Seals carried out a series of tests where the leakage performance of five different wipers working with a common polyurethane rod seal was assessed. It is shown that he wiper is an important factor in the control of leakage from the hydraulic cylinder gland. Single lip wipers can give a much greater leakage than the seal, on its own, without a wiper. This is the result of the wiping lip collecting the oil on the rod, which provides the boundary lubrication to the seal. The use of double lip wipers reduces the leakage to the level of that of a seal on its own, but there is a danger of pressure trapping between the seal and the wiper. A double lip wiper profile has been developed, which minimizes the ring of oil on the rod collected by the wiping lip, and also has a venting feature to release the oil in the case of a pressure build up between the seal and wiper.
About the Author
Hallite Seals International are an ISO 9001 accredited manufacturer and provider of Hydraulic Seals and sealing solutions to the global fluid power industry. We operate in all five continents of the world, and work with a number of major international brands – renowned for their commitment to engineering excellence.
For over 100 years Hallite Seals International has been at the cutting edge of fluid power technology, manufacturing a wide range of rod / gland, piston, and static seals, as well as support and bearing components, for technically challenging applications, from a wide range of materials which include Polytetrafluoroethylene (PTFE), Polyurethane (AU), nitrile rubbers (NBR) and Fluoro-elastomers (FKM).
Round or cylinder cube on compiz git Ubuntu Hardy 8.04
|
|
ORIGINAL PRINTED PATENT APPLICATION NUMBER 26,911 FOR IMPROVEMENTS IN LIGHT TWO STROKE CYCLE MOTOR FOR AVIATION, WITH CYLINDERS REVOLVING ROUND THE CRANK AXLE. (1910) … |
|
|
Maximum Boost: Designing, Testing, and Installing Turbocharger Systems (Engineering and Performance) $20.95 … |
|
|
The Cylinder: Kinematics of the Nineteenth Century (FlashPoints) $43.73 The Cylinder investigates the surprising proliferation of cylindrical objects in the nineteenth century, such as steam engines, phonographs, panoramas, rotary printing presses, silos, safety locks, and many more. Examining this phenomenon through the lens of kinematics, the science of forcing motion, Helmut Müller-Sievers provides a new view of the history of mechanics and of the culture of the i… |
|
|
Baldwin 385 RDB 15 SMT CP RCAL 385 Double Cylinder Round Deadbolt Featuring SmartKey, Satin Nickel $45.99 … |
|
|
Baldwin 380 RDB 15 SMT CP RCAL Single Cylinder Round Deadbolt Featuring SmartKey, Satin Nickel $36.35 The classic round shape of this Baldwin round deadbolt complements and enhances a variety of design styles. It can be paired with a number of entry knobs from Baldwin’s Prestige series, and this version comes in a satin nickel finish. It features revolutionary SmartKey Re-Key technology, allowing you to control who has access to your home. You can re-key your lock in 3 easy steps, and there is n… |
|
|
Baldwin DC.TRD.003.6L.DS.CKY.KD Traditional Round Double Cylinder Deadbolt, Polished Brass $32.50 Since 1946, Baldwin Hardware has delivered modern luxury to discriminating homeowners, architects and designers through superior design, craftsmanship and functionality. The popular design of the Traditional Round Deadbolt is a timeless classic. Polished Brass is polished to perfection then lacquered to capture the high point of lustrous beauty. Deadbolt operated by key outside and key inside…. |
|
|
Danielle Cylinder Acrylic Cotton Pad Dispenser $11.80 Easy to clean and flatters any bathroom d�cor. Cylindrical unit keeps cotton pads neatly stacked and visible…. |
|
|
Set of 36 Cylinder Vases and 36 Floating Candles 3, White $134.99 Set of 36 Cylinder Vases and 36 Floating Candles 3″. This set includes twelve of each size: 6.0″ Tall x 3.25″ Wide, 7.5″ Tall x 3.25″ Wide, and 10.5″ Tall x 3.25″ Wide. Diameter of opening is approximately 3.25″. These work perfectly with the included hand poured 3 inch floating candles. Floating candle size: 3″ Wide x 1.4″ Tall. Burn time is approximately 8-10 hours. Choose from 13 different colo… |
|
|
BodySport Foam Rollers This smooth surface traditional roller provides firm support for all body types. Pilates, yoga, rehabilitation, and many other exercises can be enhanced with the addition of foam rollers. Use them to help develop balance, postural alignment, and flexibility or as support for dynamic strength exercises. Foam rollers come in various sizes and denseness, with the more dense rollers being ideal for se… |